Building Adversaries

Building adversaries is a lot like building anything else in Fate. All of the adversary types use the same building blocks as characters: aspects, skills, stunts, stress tracks, and consequences. Some adversaries have all of these components, while others just have one or two. Most fall somewhere in between.

When you’re creating adversaries and you’re faced with the choice of using rules in this book or another Fate book, use whichever feels better. Use whichever does the job the way you want it done. There’s no need to stick with a choice, either. You might be playing Shadow of the Century and decide that throwing in some mooks and a lieutenant from that book is appropriate for one fight, while in the next you’ll use some threats, hitters, and a boss from this book. That’s fine. Heck, throw them into the same fight if you want to!

The bottom line is that everything in this book is Fate, and you can use it with—or instead of—other Fate books with little to no tweaking. If you’re playing something like Fate Accelerated or The Dystopian Universe RPG, you might want to swap out skills for approaches or means, but that’s easy enough and everything else should work just fine.

You can also combine the advice in this chapter with the rules in other Fate books. If you want to run a straight-up Atomic Robo RPG or Dresden Files Accelerated Edition game without any of the rules presented here, you can still use the advice in this book to help you use those rules more effectively.

Have fun.

Enemies

Enemies have one thing in common: you can punch them. Or more accurately, you can defeat them by attacking them. All enemies have aspects, skills, and stress tracks. Some have stunts, and some have consequences.

Enemies are the most familiar type of adversary because they are the most similar to player characters. The NPCs opposing the PCs are typically enemies, but enemies don’t have to be people (or robots, or gorillas, or whatever). It might be an idol in a magic circle that pulses with malevolent energy—as long as you can defeat it by dealing it stress, it’s an enemy. A fire raging out of control could be an enemy; it’ll attack nearby PCs and take stress whenever they hose it down or combat it with other firefighting techniques.

Enemies are your bread and butter as a GM. They’re the main course. They’re the lion’s share of the adversaries you’ll use, because fighting things in Fate is dramatic and interesting, whether it’s a fistfight or an argument on the floor of the Galactic Senate.

There are four types of enemies: threats, hitters, bosses, and fillers.

Threats

Threats exist to threaten: that is, they draw the PCs’ attention, hold it, and soak up punishment. They’re not necessarily the hardest hitters, but leaving them to their own devices is problematic. They get up in the PCs’ faces and make the PCs want to get rid of them. Threats are your tanks; they’re meat shields for the really important or nasty enemies in the fight.

Aspects

Threats have a high concept and a trouble. If a threat’s particularly important, give her a third aspect. Emphasize her physical size, toughness, immovability, or stubbornness. Give her an Achilles’ heel that the PCs can exploit.

Skills

Set the threat’s apex skill to one step above the PCs’ highest-rated skill or, if you want a particularly tough threat, two steps above. Then, give your threat two more skills rated one step below the apex skill. If you want to define the threat further, give her three more skills rated one step below that.

A physical threat prioritizes Physique, then Fight or Shoot. Skills like Athletics and Will are useful for getting out of the way or resisting mental or social attacks. A social threat prioritizes Will, then some combination of Empathy, Rapport, Provoke, and Deceive. Lore is useful for creating advantages.

Stunts

Threats need at least one stunt that they can use to make the PCs want to deal with them. A really tough threat could also have a stunt that makes her tougher, giving her an Armor rating or extra stress boxes. Here are some examples of threatening stunts:

Grenadier: By spending a fate point, you can physically attack everyone in a zone.

Bodyguard: Designate a character, place, or object to guard. Whenever that thing is attacked and you are in the same zone, you can spend a fate point to redirect the attack to yourself. You gain Armor:1 against this attack.

Naysayer: +2 to create advantages with Provoke by fomenting arguments that undermine the PCs or make them look foolish.

Quick-and-Dirty Enemy Stunts

If you need a stunt for an enemy quickly, pick one of these and call it a day. Some of these might be a touch powerful for a PC, but they’re fine for an NPC who might not be around for more than one fight.

• When you attack with your apex skill, you get Weapon:2.
• When you defend with your apex skill, you get Armor:2.
• Twice per session, you can use your apex skill in place of any other skill.
• Once per session, you can attack everyone in a zone with your apex skill.

Stress and Consequences

Physical threats have large physical stress tracks because of their high Physique, while social threats have similarly large mental stress tracks because of their high Will.

If you’re using Fate rules that don’t grant additional stress boxes for high skill ratings, consider giving the threat a stunt that does so. In addition, all threats have at least a mild consequence slot; particularly tough ones also have a moderate slot.

Using Threats

Threats always get right up in the PCs’ faces. They don’t let up. They don’t go easy. They attack constantly, relentlessly, making nuisances of themselves. When a threat gets taken out, the PCs should be relieved. Don’t be cautious with your threats; they exist to soak up punishment, and they have the chops to do so.

Put at least one threat into most fights. An easy fight has one, a standard fight has two or three, and a climactic encounter probably has four or five. Any conflict with a boss should have at least two threats to take the heat off of the boss, and any fight with a hitter should have at least one threat to distract the PCs.

When you’re describing threats, play up their menace. The bodyguards are big and tough, brandishing nasty-looking weapons. The king’s chamberlain brooks no nonsense, does not tolerate fools, and is looking for an opportunity to get the rabble-rousing PCs tossed out of the palace. Threats get in the way of the PCs’ plans; they exist to thwart and stymie. They’re roadblocks.

Hitters

Hitters are often easily overlooked, but they’re able to strike with devastating effect. They don’t necessarily hit hard every time, but under optimal circumstances, they can really make the PCs hurt.

That said, hitters can dish it out but typically can’t take it. Often, the PCs won’t know that a hitter is a threat until it’s done some damage, but once the PCs know about it, they should be able to take it down fairly quickly. Hitters are glass cannons.

Aspects

Hitters have a high concept and a trouble. If a hitter is particularly important, give her a third aspect. Emphasize how dangerous she is or why she’s difficult to notice. Give her a weakness that points to some oversight, overconfidence, or other exploitable flaw.

Skills

Set the hitter’s apex skill to one step above the PCs’ highest-rated skill or, if you want a particularly dangerous hitter, two steps above. Then, give your hitter two more skills rated one step below the apex skill. If you want to define the hitter further, give her three more skills rated one step below that.

Prioritize skills that deal stress to the PCs. For physical hitters, Fight or Shoot are the most important. Other skills should focus on mobility or keeping attention elsewhere; Sneak, Deceive, and Athletics are all good choices. For social hitters, Provoke, Deceive, and Rapport could all be used to good effect. Other important skills are Empathy, Notice, and Contacts. Don’t give hitters skills like Physique or Will. If an enemy is both tough and hits really hard, it’s a boss, not a hitter.

Stunts

A hitter always has, at the very least, a stunt that confers Weapon:2 on her primary attack. If you want to make her particularly dangerous, give her a stunt that makes her harder to spot too. Another excellent type of stunt to give a hitter is a way to hit really hard with a non-standard skill under the right circumstances; this way, the hitter can do her job, but becomes less effective when confronted directly. Here are some examples:

Sniper: When you attack with Shoot and invoke an aspect representing careful aim, you gain Weapon:2 on the attack.

Sneak Attack: Provided you haven’t been spotted by your target yet, you can attack with Sneak instead of Fight.

Ninja Vanish: By spending a fate point, you can make yourself vanish from the scene entirely. Then, at the end of any later turn, you can spend another fate point to make yourself reappear anywhere in the scene and immediately attack.

Stress and Consequences

Most hitters will have the bare minimum stress track. If you want a hitter to be particularly important or nasty, give her a mild consequence slot. Otherwise, don’t give her any consequence slots. Hitters show up, hit hard, and die off quickly.

Using Hitters

Where threats are all about relentless assault, using a hitter effectively is a game of patience and opportunity. At first, the PCs might not even clearly see there is a hitter in the scene. Keep your hitter unseen or unnoticed, maneuver her into position, and then strike without remorse. Don’t be afraid to spend a fate point or two to make a hitter’s attack count; she may not get a second chance. Once the PCs start focusing on your hitter, don’t spend a lot of resources trying to protect her. Let the PCs feel awesome. Hitters are meant to be fragile, and protecting them generally isn’t worth it, especially once they’ve pulled their trick off.

Don’t use hitters in every conflict. If you put a hitter in a conflict, a PC will likely take a consequence. Putting two in a fight means you might put down some serious hurt. Three could mean that a PC gets taken out.

When you do use hitters, put in other enemies to distract from the hitter. Threats are perfect for this, and fillers can be good too. As for obstacles, a distraction or a block can make for good camouflage, too.

Bosses

Where threats and hitters are specialized enemies, and fillers are generic bad guys, bosses are those special enemies who the PCs just can’t wait to take down. Bosses are the focal point of a set-piece battle, the big personalities that drive the adventure, the antagonists that hound the PCs at every turn.

Aspects

Bosses have a full spread of five aspects. Give your boss a high concept that drives home what she’s all about. Is she the Corrupt Police Captain? The Necromancer General? Your boss’s trouble should be a closely guarded secret that the PCs can exploit if they find out about it.

For the other three aspects, come up with some unique shticks that your boss relies on, things that’ll make her memorable. Maybe the corrupt police captain is an Expert Martial Artist, or maybe the necromancer general carries the All-Seeing Staff.

Skills

A good boss has highly rated skills, and lots of them. Bosses are far more versatile than either hitters or threats and, unlike those two types of enemies, it’s entirely within your purview to make a boss who’s both good at dealing damage andgood at taking it.

First, look at the highest-rated PC skill. Either give your boss one skill rated at two steps higher, or two skills rated at one step higher. If your boss has one apex skill, give her two skills rated at one step lower, then three rated at one step below that, and so on until you’ve filled out every step of the ladder down to Fair (+2). If the boss has two apex skills, give her three rated at one step below, then four, and so on down until Fair (+2). All of her other skills are Average (+1).

Your boss should prioritize skills that support her personality. The corrupt police captain probably has high social skills, some good combat skills, and skills like Drive, Lore, and Crafts down toward the bottom of her pyramid. The necromancer general probably prioritizes Lore above all else, then goes on to prioritize things like Resources, Provoke, Contacts, and Crafts, then leaves more physically oriented skills for the bottom of her pyramid. Of course, you can always subvert these expectations.

Stunts

A boss always has at least one stunt, and as many as three. Create stunts that make the boss memorable, stunts that bring in more bad guys to fight, stunts that make the boss hard to deal with, and stunts that represent her social status or allies. Here are some examples:

Connected: Once per session, you can draw on your contacts to bring in reinforcements. These reinforcements take the form of either one hitter with an apex skill rated equal to your Contacts, two threats with apex skills rated one step lower than your Contacts, or Fair (+2) fillers equal in number to your Contacts. When you use this stunt, you can spend one fate point to gain +2 to Contacts, to a maximum of Great (+4), for the purpose of bringing in these reinforcements.

Escape Plan: Once per session, if you would get taken out, you can spend a fate point to concede instead.

Mook Shield: Whenever you are attacked, you can spend a fate point to divert the attack to nearby filler enemies.

Stress and Consequences

Bosses have stress tracks of varying lengths based on their skills, but all bosses have at least a mild and a moderate consequence slot, and a particularly nasty boss has a severe consequence slot too.

Using Bosses

All bosses are memorable, with personalities and goals of their own. To that end, taking a boss down should always be a big deal, and probably shouldn’t happen every session. You can let the PCs fight a boss frequently, but be careful with your bosses—don’t be afraid to concede. They’re not as disposable as other kinds of enemies are, so it’s a viable tactic to concede, so the boss can threaten the PCs later. But don’t rob the PCs of their victory, either. When the PCs do defeat a boss, make it a big deal, and reward them accordingly.

Most fights with a boss contain only one, though you could have two or even three in a really climactic encounter. That should be the exception rather than the rule, though, and it’s often useful to call out which boss is a bigger deal than the others. In an encounter, use your boss’s personality to inform how she behaves. An aggressive, combative boss will get right up in the PCs’ faces, while a cautious, politically oriented boss will hide behind minions.

Fillers

When you want to fill your scene with enemies, but you don’t want the complexity of adding more hitters, threats, or bosses, then fillers are what you need. Fillers are easy to run and keep track of, and they let the PCs feel like badasses as they take down hordes of bad guys.

Aspects

Give your filler enemy a name that encapsulates its function in the scene, like Mob Enforcer, Crazed Velociraptor, or Flamethrower Turret. A filler’s name is an aspect, and its only aspect.

Skills

First, decide on your filler’s quality: Average, Fair, or Good:

• An Average filler has one Average (+1) skill.
• A Fair filler has one Fair (+2) skill.
• A Good filler has one Good (+3) skill and one Average (+1) skill.

You can use skills from Fate Core or whatever Fate game you’re playing, or you can make up brand-new skills specific to your fillers. Those mob enforcers might have Fair (+2) Tommy Guns, while the crazed velociraptors might have Good (+3) Claws & Fangs and Average (+1) Dodge. If a filler enemy ever does something that isn’t covered by its skills, it rolls at Mediocre (+0) or it automatically fails (if that would be simpler).

Stunts

Fillers don’t get stunts. They exist to be simple, and stunts make them more complex than they need to be. You can, at your option, make them dangerous fillers, giving them Weapon:1.

Stress and Consequences

A filler has one 1-stress box per quality step—so a Good filler has three 1-stress boxes, for example. Unlike characters and other types of enemies, a filler can mark off as many of its stress boxes as it likes to absorb a single hit. So, if a filler takes a 2-stress hit, it can mark off two of its stress boxes.

Fillers never have consequence slots.

Grouping Fillers

To make fillers simpler and more effective, you can group a number of them into a single enemy. A filler group has all of the skills that its fillers have. For every two fillers with the same skill in the group, add a +1 bonus to that skill. A filler group’s skills can never be rated higher than Great (+4), however.

A crazed velociraptor groups up with a mob enforcer, so the group has Good (+3) Claws & Fangs, Fair (+2) Tommy Gun, and Average (+1) Dodge. Later, when a second mob enforcer joins, the group’s Tommy Gun increases to Good (+3).

To make the group’s stress track, arrange the stress boxes of each filler in the group into a single track. Divide up the track so you can figure out when each filler in the group gets taken out, with weaker fillers on the left and stronger fillers on the right.

The group of two mob enforcers and a velociraptor would have a stress track that looks like this:

[1] [1] | [1] [1] | [1] [1] [1]

When the group takes stress, start ticking off boxes on the left, and move to the right until all the stress has been absorbed, or the entire group has been taken out. Because the track is divided up by each filler, you’ll be able to tell when each filler gets taken out, letting you reduce the group’s skills appropriately. When fillers are grouped, it’s entirely possible for PCs to take out multiple fillers in one go.

Using Fillers

Fillers are there to be color. They fill out the ranks of the enemy team, but they’re not particularly dangerous or durable. Don’t be afraid to drop a bunch of them into a fight, grouping them up to keep things simple and make them a little more threatening. Fillers are easy come, easy go, so don’t go out of your way to protect them. You can also put fillers in a support role, creating advantages that they pass to more powerful enemies. A group of goons laying down distracting covering fire can make the hitter sneaking up behind the PCs that much more dangerous by passing him a free invoke or two.

Obstacles

The defining quality of enemies is that they can be attacked and taken out. By contrast, the defining quality of obstacles is that they cannot. Obstacles make scenes demonstrably more difficult on the PCs, but the PCs cannot simply fight them. Obstacles must be circumvented, endured, or rendered irrelevant.

While most obstacles are features of the environment, some might be characters that can’t be taken out using conventional methods. The dragon might be a boss, but it might just as easily be a hazard obstacle. The animate statue keeping you from getting to the evil wizard might be a threat, but it could also be a block or a distraction. It all depends on the adversary’s function in the scene, and how PCs must deal with it.

In general, obstacles don’t appear in every scene. They serve to accent enemies in the scene, to make them more threatening or memorable, but overuse of obstacles can be frustrating to the PCs, particularly those focused on combat. You canuse them to give less combative PCs something to do during a fight, though.

There are three types of obstacles: hazards, blocks, and distractions.

Hazards

If an obstacle can attack the PCs, it’s a hazard. Fire jets, rolling boulders, or a sniper too far away to be dealt with directly—they’re all hazards. Every hazard has a name, a skill rating, and a Weapon rating of 1 to 4.

The hazard’s name is both a skill and an aspect; that is, the name defines what the hazard can do, and its skill rating defines how good it is at doing that, but the name can also be invoked or compelled like any aspect. Generally speaking, a hazard’s skill rating should be at least as high as the PCs’ highest skill rating, if not a little bit higher.

Here are some examples:

Great (+4) Machine-Gun Turret, Weapon:3 Fantastic (+6) Whirling Spike Apparatus, Weapon:2 Superb (+5) Distant Sniper, Weapon:4

A hazard acts in the initiative just like the PCs and their enemies do. If your rules require everyone to roll for initiative, hazards will roll with their rating.

On its turn each exchange, a hazard acts as implied by its name, and rolls with its rating. If it attacks and succeeds, add its Weapon rating to its shifts. Hazards can attack or create advantages; they can’t be attacked, and they don’t overcome obstacles.

If a player wants to overcome or create an advantage against a hazard, they’ll face passive opposition equal to the hazard’s rating.

Joan is near the window, and there’s a Distant Sniper out there, a hazard with a Superb (+5) rating and Weapon:4. At the beginning of the conflict, the sniper used its Superb (+5) rating to determine its initiative. Now that it has a chance to act, it attacks Joan, rolling an Epic (+6) result! That’s a tough attack to defend against, and if Joan can’t, the sniper’s Weapon:4 will deal a lot of stress to her.

Which Weapon Rating?

Which Weapon rating you choose depends on how lethal you want to make your hazard. A hazard with a very high skill rating and a very high Weapon rating will likely take out a PC or two. You could also make a hazard with a lower skill rating but a high Weapon rating, making for something that doesn’t hit often but hits hard when it does. Reversing that makes for a hazard that hits frequently but doesn’t do much damage—more of a nuisance than a hazard, but that might be what you want.

Using Hazards

Hazards, like enemies, can attack the PCs, and they’re very simple to run, so you might be tempted to use them often. This isn’t necessarily a bad instinct, but keep this in mind: hazards can’t be attacked or taken out like enemies can. This might mean that the hazard stays in play for the entire scene, continually causing the PCs stress that they can’t mitigate effectively. There are a few ways you can offset this, should you wish to.

First, you could make a hazard situational. The Machine-Gun Turret will attack, but only when the PCs are in the hallway. The Lone Sniper will try to pick people off, but there’s a lot of cover that can confound her sight lines. Giving the PCs actions they can take to avoid being attacked by hazards can make for interesting, complex tactical scenes, particularly when the PCs must leavetheir safe spots in order to accomplish their goals. Difficult decisions can be a lot of fun.

Second, you could let the PCs overcome a hazard. Maybe they can shut off the Machine-Gun Turret by getting to the control panel. Perhaps that Whirling Spike Apparatuswill stop whirling if they jam a giant piece of metal in it. To disable a hazard, you must first take a risk, putting yourself (or someone else) in some kind of danger, and then roll an overcome action against passive opposition equal to the hazard’s rating. So, you have to run down the hallway guarded by the machine guns in order to get to the control panel you can use to shut them off, or you have to get dangerously close to the whirling spikes in order to jam the hunk of metal into the apparatus.

Third, you could let the PCs turn a hazard into an enemy under the right circumstances. This requires a risk, and often requires time or an overcome roll. Maybe the PCs just really want to blow up that Machine-Gun Turret, but the turret is behind a metal shield. Hacking a console to disable the shield—a console that’s in the hallway it’s firing on—could transform the machine gun from hazard into threat, letting the PCs attack it. If a PC is willing to run right at that Distant Sniper, spending an exchange and drawing her fire, he could actually attack her in single combat, as a hitter rather than a hazard. This is similar to simply disabling a hazard, but requires the PCs to take an extra step. It can be more exciting, but it takes more time and effort on the PCs’ part.

Blocks

Where hazards exist to hurt the PCs, blocks prevent them from doing things they want to do. Blocks can cause stress, though they don’t always. The chief difference between blocks and hazards is that blocks don’t take actions, while hazards do. Blocks provide passive opposition in certain circumstances, and can threaten or cause harm if not heeded.

Like hazards, blocks have a name and a skill rating, and the name is both a skill and an aspect. Unlike hazards, a block’s skill rating shouldn’t be much higher than one step above the PCs’ highest skill rating; otherwise, things can get frustrating quickly. A block can have a Weapon rating as high as 4, but it doesn’t need to have one. Here are some examples:

Fair (+2) Chain Link Fence Good (+3) Vat of Acid, Weapon:4 Great (+4) Animate Statue, Weapon:1

Blocks only come into play under specific circumstances. A Vat of Acid only matters when someone tries to cross it or gets thrown into it. A Chain Link Fence only affects someone who tries to get past it. The Animate Statue only prevents entry into a specific room.

Blocks don’t attack and don’t have a turn in the initiative order. Instead, whenever a block would interfere with someone’s action, they’ll have to roll against the block’s rating as passive opposition. If the block can’t cause harm, like if it’s a Chain Link Fence, it simply prevents the PC from taking the action they wanted to. If it can cause harm—like if it’s a Vat of Acid—and the PC fails to overcome the block, the PC takes a hit as if the block attacked the PC, and the PC failed to defend by the same margin by which it failed to overcome the block.

Also, characters can try to force someone into a block as an attack. If you do this, you’ll roll to attack as normal, but add a Weapon rating equal to half the block’s Weapon rating (rounded down, minimum 1). So, anyone trying to cross the Vat of Acidwould need to beat Good (+3) opposition. If someone tried to force you into the acid, they’d attack you with Physique and, if they succeeded, add Weapon:2.

Finally, some blocks can be used as cover or as armor. This is situational—for some blocks, it simply won’t make sense. You can’t hide behind a Vat of Acid, and a Chain Link Fence won’t stop a bullet. But that Chain Link Fence is effective protection against a baseball bat, probably preventing the attack altogether. And if the evil wizard is hiding behind the Animate Statue, it might soak up some damage.

When someone’s using a block as cover, decide whether it mitigates or negates the attack. If it negates it, the attack simply isn’t possible. If it mitigates it, the defender gets an Armor rating equal to half the block’s skill rating (rounded down, minimum 1). So, if the evil wizard used the Animate Statue as cover, he’d get Armor:2.

Using Blocks

Blocks make it harder for PCs to take certain actions, so they can be frustrating if you overuse them. But they can also force the PCs to think creatively, or even to figure out how to use the blocks to their advantage.

Use blocks sparingly; in many cases, you’ll want to use a threat or two instead. That said, sometimes a block is exactly what you want, and they’re pretty simple to use. If your players are getting frustrated with a particular block, you can give them the option to disable it somehow.

To disable a block, removing it from the scene, you must take a risk, putting yourself (or someone else) in danger, and make an overcome roll. The overcome roll is against passive opposition rated two steps higher than the block’s rating.

Hailey wants to remove the threat of falling into the Good (+3) Vat of Acid, so she decides to try to drop the vat’s lid down on it. “You’re going to have scramble over the vat to get to the lid,” says the GM. “Give me a Superb (+5) Athletics roll. If you fail, you’re going to fall in.” Josh is facing down a Great (+4) Animate Statue, an enemy he can’t seem to damage but that has no problem attacking him. He needs to get rid of it. He knows that etching a rune in the statue’s forehead might disable it, but to do that he needs to get pretty close. “Okay,” says the GM. “Give me a Fantastic (+6) Fight roll to get close enough to etch the rune without getting clobbered.”

Distractions

Where hazards attack the PCs directly and blocks prevent them from taking certain actions, distractions force the PCs to figure out their priorities. Of the obstacles, distractions are often the least mechanically defined. They also don’t necessarily make the scene mechanically harder. Rather, they present the PCs with difficult decisions.

Here are the distraction’s parts:

• A distraction’s name is a brief, punchy representation of what it is. It can be an aspect, if you need or want it to be.
• A distraction’s choice is a simple question that codifies the decision it gives to the PCs.
• A distraction’s repercussion is what happens to the PCs if they don’t deal with the distraction. Some distractions might have multiple repercussions.
• A distraction’s opposition is its passive opposition against PCs rolling to deal with it. Not every distraction needs to provide opposition.

Here are some examples:

Sinister Ritual

Choice: Do you deal with the enemies attacking you, or do you stop the ritual?

Repercussion: The cultists complete the ritual and summon the vile demon.

Bus Full of Civilians

Opposition: Good (+3)

Choice: Will the bus plunge off the bridge?

Repercussion (leave them): All of the civilians on the bus die.

Repercussion (save them): The villain gets away!

The Glittering Gem

Choice: Will you take the gem from the pedestal?

Repercussion (leave the gem): You don’t get the gem, which is incredibly valuable.

Repercussion (take the gem): You activate the traps in the temple.

Using Distractions

Distractions are a great way to put more pressure on a scene. If you’re afraid the PCs will deal handily with a fight you’ve got in store, adding a distraction or two can force them to decide whether it’s more important to trounce the bad guys or deal with the distractions.

Dealing with a distraction should always have a clear benefit or, failing that, not dealing with a distraction should always have a clear consequence. That said, you don’t have to let them know about any negative outcomes of dealing with the distraction.

Constraints

Constraints aren’t so much a type of adversary as they are a way to modify other adversaries. They make it more difficult or complex to deal with enemies or obstacles. You can use constraints to create urgency, to make particular adversaries more threatening, or to force the PCs to deal with an adversary in a way they otherwise wouldn’t.

You don’t have to use constraints at all, but they can add texture to an encounter or nuance to a villain. Note that adding constraints to an adversary can make that adversary a lot more difficult to deal with. There’s advice on this in each constraint entry.

There are three types of constraints: countdowns, limitations, and resistances.

Countdowns

A countdown adds urgency to an adversary: deal with it now or things will get worse. Whether you’re talking about a ticking bomb, a ritual near completion, a bus teetering on the edge of a suspension bridge, or a soldier with a radio who’s about to call in reinforcements, countdowns force the PCs to act quickly or face a worse outcome.

Countdowns have three components: a countdown track, one or more triggers, and an outcome.

The countdown track looks a lot like a stress track: it’s a row of boxes that you mark from left to right. Every time you check off a box, the countdown gets closer to being over.

A trigger is an event that marks a box on the countdown track. It can be as simple as “a minute/hour/day/exchange elapses” or as specific as “the evil villain takes a consequence or gets taken out.”

When you mark the last box, the countdown ends and the outcome happens, whatever it is.

You can give your countdown more than one trigger if you want; perhaps the countdown proceeds at a predictable pace until something happens that accelerates it. You could also give a different trigger to each box on the countdown track, if you want a specific series of events to set off the outcome.

You can find some examples of countdowns attached to enemies and obstacles starting on

Ticking Time Bomb

Obstacle

Opposition: Good (+3)

Countdown 4

Trigger: An exchange elapses.

Trigger: Someone tries to disarm the bomb, but fails by 2 or more shifts.

Outcome: The bomb explodes. (Depending on the needs and tone of your game, the explosion might kill everyone in the building, cause automatic stress to everyone in its zone, create a temporal anomaly, or have any number of other effects.)

Forward Scout

Aspects

Loyal Agent of the Empire; Better Part of Valor

Skills

Good (+3): Athletics

Fair (+2): Shoot, Sneak

Stress

Physical [1][2]

Mental [1][2]

Stunts

Scout Armor: The scout has Armor:1 against small-arms fire and melee weapons.

Consequences

Mild:

Countdown 5

Trigger (first box): The scout is attacked.

Trigger (remaining boxes): One minute elapses.

Outcome: Reinforcements arrive.

Baron von Darkness

Aspects

Dark Lord of Crime; “My intellect is unparalleled!”; Fearsome Death Ray; Wanted in Sixteen Countries; “I’ll rule this city one day.”

Skills

Superb (+5): Contacts

Great (+4): Deceit, Will

Good (+3): Provoke, Rapport, Shoot

Fair (+2): Crafts, Fight, Lore, Physique

Average (+1): Everything else

Stress

Physical [1][2][3]

Mental [1][2][3][4]

Consequences

Mild:

Moderate:

Severe:

Stunts

Contingency Plan: Whenever Baron von Darkness takes a consequence, you can pay a fate point to remove him from the scene (in a puff of smoke), replacing him with two threats.

Countdown 3

Trigger (first box): The pathetic PCs fail to stop me from robbing the First National Bank.

Trigger (second box): Those fools don’t prevent the assassination of Mayor Roberts.

Trigger (third box): Those meddlesome heroes don’t stop me at my secret undersea base.

Outcome: My glorious mind-control device allows me to secretly control the city from beneath the waves!

Using Countdowns

Countdowns are all about urgency. They force the PCs to deal with particular threats, or to escape them before things get worse. Use them sparingly; sometimes you want the PCs to be able to deal with threats at their own pace, so they can highlight their competence. But when you want to really put the screws to them, countdowns can help.

Countdowns are also useful for threatening PCs who are hard to threaten. If your PCs are incredibly efficient in every fight, give them a fight with a countdown or two that threatens to make their lives incredibly difficult. Or, better yet, give them two countdowns that are difficult to deal with simultaneously. Force them to choose.

You can also use countdowns to add verisimilitude to encounters, as with the forward scout (

You don’t have to confine a countdown to a single scene. You could attach a countdown to your main villain, as with Baron von Darkness, that represents their master plan and its stages. Doing this adds both structure and urgency to your adventure or campaign, impressing upon the PCs that if they don’t act, the villain will go ahead and realize his plans.

One word of caution: tracking many countdowns at once can be difficult, particularly if they all have different triggers. If your scene has three or four countdowns that all trigger at different times, you might find yourself forgetting to check off some of their boxes.

Limitations

Limitations are fictional elements that alter how PCs must deal with a particular threat. Maybe they can’t just kill the werewolf that’s been terrorizing a small Pennsylvania town, because he’s the son of one of the PCs and doesn’t know what he’s doing when he’s a werewolf. Maybe the mob boss is protected from on high by powerful politicians, and the direct approach is untenable. Maybe the reactor that’s in meltdown is nearly impossible to repair because it vaporizes any organic material that comes near.

When you create a limitation, give it either an aspect or a fact. A fact is a true thing: the reactor vaporizes organic material when it comes near. If you want to make a limitation more concrete and mechanical, use an aspect instead. Aspects are always true, just like facts, but you can invoke and compel them.

But be wary of giving something too many aspects. For most adversaries, you can just add the aspect and be fine. For adversaries that already have five aspects or are really complex, you may want to replace an existing aspect with the limitation aspect.

You can also give a limitation a Weapon rating. For example, if the PCs are battling on the edge of a pool filled with carnivorous fish, you might impose a limitation of Filled with Piranha with Weapon:3. There’s no roll involved with getting attacked by the piranha; instead, entering the pool of water acts as a special sort of compel. In this case, you’d offer the player a fate point, and if they accept it—piranha, damn your luck!—they’d take stress equal to the Weapon rating (in this case, 3). In this way, you can create situation aspects that have hard mechanical consequences attached to their compels.

Using Limitations

Limitations don’t outright forbid actions; they simply discourage them. There’s nothing saying that the PC can’t kill her werewolf son to stop the threat to the town, but she’s unlikely to because she cares deeply about him, and because he doesn’t actually realize what he’s doing.

When you add a limitation to an adversary, you’re doing two things: First, you’re creating an interesting wrinkle that the players have to deal with. Limitations are best when you reveal them unexpectedly; they work well as surprise twists. Second, you’re making that adversary more important to the story. A limitation forces the players to deal with a threat in a way other than the most straightforward method. This means the players will likely have to spend more time dealing with the threat, making it more important in the fiction. They might spend a few extra exchanges taking out a particular bad guy, ensuring they remember that bad guy more. Or they might spend the entire adventure figuring out how to deal with something. Either way works.

Try not to use more than one or two limitations in an adventure. If too many issues need to be dealt with in atypical ways, you’ll risk frustrating players with characters built for handling regular tasks. If you’ve got an engineer character, but every machine the PCs encounter is biomechanical and requires knowledge of advanced xenobiology knowledge to handle, the engineer is going to feel pretty useless. If only one such machine exists, though, the engineer gets to keep doing his thing, and that one machine becomes a focal point of the adventure.

Resistances

Resistances are similar to limitations, except that they do effectively forbid a particular course of action. The dragon is immune to the weapons of mortals, so you can’t fight it in physical combat. The alien does not understand Earthly communication, so you cannot reason with it. The wall’s surface is unnaturally smooth, so you cannot climb it. Where limitations encourage the PCs to deal with an adversary in a new way, resistances force such an approach. There is, however, always a chink in the armor, embodied in the resistance’s two parts: its lock and key.

The resistance’s lock is an aspect that states exactly what the adversary is immune to. Aspects are always true, so you don’t have to spend fate points to make the lock affect the story. If the PCs attack the dragon with their swords, the fact that it’s Immune to Mortal Weaponry means they have no chance of hurting it.

The key is the one thing that can bypass the lock, allowing the PCs to deal with the adversary in the way they want to. The key can be an aspect, an extra, a character, another adversary, or just a fictional element. It varies by adversary and by resistance.

Here are some examples:

The Dragon

Lock: Immune to Mortal Weaponry

Key: The Sword of Avelah, created by an immortal race long ago, can harm the dragon.

The Alien

Lock: Doesn’t Understand Earthly Communication

Key: Emily Jace, the only survivor from a deep-space expedition, is the only human known to have learned the alien language.

The Wall

Lock: Unnaturally Smooth, Can’t Be Climbed

Key: If you can get a device that’ll vibrate at the right harmonic frequency, you can walk right through the wall.

Using Resistances

One danger of using a resistance is that it is, effectively, a roadblock. A limitation encourages the players to think creatively, while a resistance forces them to find another way, or to find the one thing that lets them address the problem directly. This means two things:

First, never have more than one resistance in play at a time, unless you have a very good reason. Resistances have the potential to frustrate players even more than limitations do, so don’t overuse them.

Second, unless the players decide to give up on addressing the adversary, they’ll likely need to go on an adventure, or at least a series of scenes, to get the key to the adversary’s lock.

Resistances can be good adventure hooks. A dragon threatening the village is an easy way to get the PCs to buy in, but if what you actually want them to deal with is over on the other side of the world, sending them off on an adventure there to get the key to the dragon’s lock can be a sneaky way to do it, and can add some urgency to boot.